Embedded network interfaces

Item number: EC7133J_00MA

The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!

Item number: 1.01.0067.44010

The Ixxat CAN-CR200 repeater with two CAN interfaces and one CAN backbone interface improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. Multiple repeaters can be lined up and connected easily via the integrated DINrail bus to create various topologies and optimize network structures.

Item number: 101-201210

The Anybus SCOPE Repeater is a 1 Channel RS 485 PROFIBUS diagnostic repeater module with an integrated quality-oscilloscope for live measurements

Item number: Anybus-Atlas-PXX

While retaining the same technical features as its predecessor, the Anybus Atlas2 Plus now boasts an intuitive interface. This enhancement enables users to gain immediate insights into their network’s health with a single comprehensive overview. For more information and how to order, please refer to the supporting materials of this product or contact us directly.

Item number: 1.01.0231.12001

The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel and galvanic isolation, equipped with a standard profile slot bracket. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration, supporting various CAN applications.

Item number: IN7004853K00000

Integrate any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.

Item number: EC7133N_00MA

The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secure industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!

Item number: EC7133M_00MA

The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!

Item number: INMBSOCP0200100

Configure this gateway as a Modbus RTU/TCP - OCPP protocol translator or move a step further with its OCPP Central System mode, which allows the gateway and the BMS to substitute the Central System of the OCPP installation and get all the potential of the Modbus-based BMS.

Item number: EC71330_00MA

The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!

Item number: 021620-B

The Ixxat CM CANopen is a compact interface module designed for the integration of CANopen or CAN 2.0A devices with SIMATIC S7-1200 PLCs. Acting as a bridge with comprehensive support for CAN protocols, it facilitates communication and data transmission between devices and the PLC. For more flexible development and expansion of automation systems.

Item number: IN770AIR00MO000

The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 100 groups from a single interface.

Item number: AB6739-C

Item number: AB6834-C

Item number: AB6775-C

Item number: AB6673-C

Item number: 017504

The Anybus PROFIBUS Master Simulator enables you to set up and test slaves/adapters on PROFIBUS without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.

Item number: AB6666-B

Used together with the CompactCom Brick to get quick and easy access to network connectors.