Gateways (protocol converters) are the fastest way to get devices connected to industrial and building networks. Just connect, configure and you’re done! HMS offers more than 600 unique network connectivity gateways that connect machines, devices, vehicle networks, PLCs and systems from different vendors.
Bosch to Modbus TCP/RTU - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 16 indoor units from a single interface.
Daikin to BACnet MS/TP - 1 indoor unit
The Daikin-BACnet interface allows full bidirectional communication between Daikin VRV and Sky Air Conditioner units and BACnet MS/TP networks. The interface enables BACnet communication via polling or subscription requests (COV), making the indoor unit available through independent BACnet objects. A wired remote controller can also be connected.
Industrial Firewall for NAT and Network Segmentation
Powerful industrial security appliance engineered to provide unparalleled protection for operational technology (OT) networks. Featuring a robust combination of Network Address Translation (NAT), Routing, and advanced stateful firewall features it’s ideal for network segmentation use-cases in industrial environments following IEC/ISA 62443-3-3 guidelines.
Bosch to KNX - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 64 indoor units from a single interface.
Configurable automotive platform (4 x CAN + 4 x CAN FD, 2 x CAN LS)
The Ixxat FRC-EP190 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based applications. Featuring LIN and eight CAN channels, thereof four CAN FD and two CAN low-speed capable, it's ideal for logging, gateway and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Bosch to Home Automation - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to Modbus TCP/RTU - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Bosch to Home Automation - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a Home Automation system. The solution allows the integration of up to 16 indoor units from a single interface.
Bosch to BACnet/IP & MS/TP - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 16 indoor units from a single interface.
Bosch to KNX - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Daikin to Modbus RTU Interface - 1 indoor unit
The Daikin-Modbus interface allows full bidirectional communication between Daikin VRV systems and Modbus RTU (RS-485) networks. The interface acts as a server device for the installation, accessing all signals from the air conditioner unit.
Bosch to BACnet/IP & MS/TP - Up to 4 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 4 indoor units from a single interface.
Configurable automotive platform (1 x EtherCAT, 4 x CAN, 4 x CAN FD)
The Ixxat CANnector LE is a powerful platform, ideally suited for e-mobility and automotive applications by merging multiple bus systems into a single device. It features two LIN and up to eight CAN channels, four of which are CAN FD capable, including Industrial Ethernet support – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Bosch to KNX - Up to 16 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a KNX installation. The solution allows the integration of up to 16 indoor units from a single interface.
Bosch to Home Automation - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Bosch to Modbus TCP/RTU - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 64 indoor units from a single interface.
Bosch to BACnet/IP & MS/TP - Up to 64 Indoor Units
The Bosch application has been specially designed to allow bidirectional control and monitoring of Bosch Air Flux and Mini-VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allows the integration of up to 64 indoor units from a single interface.
All-in-one set with USB-to-CAN interface and useful accessories
The Ixxat USB-to-CAN V2 Starter Kit offers a ready-to-go solution for connecting CAN networks to computers, perfect for getting started with CAN applications. This kit includes the USB-to-CAN V2 professional interface, two RJ45 to Sub-D9 adapter cables, a ribbon cable with four D-Sub 9 connectors, two termination resistors, and a gender changer for a quick and easy setup right out of the box.