Anybus Diagnostics products make sure industrial networks don't go down. They provide permanent monitoring and troubleshooting tools alongside a range of services that ensure network uptime.
Mitsubishi Heavy Industries to Modbus TCP/RTU - Up to 4 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 4 indoor units from a single interface.
Fujitsu to Home Automation - Up to 64 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a Home Automation system. The solution allows the integration of up to 64 indoor units from a single interface.
Fujitsu to KNX - Up to 4 Indoor Units
The Fujitsu application has been specially designed to allow bidirectional control and monitoring of Fujitsu VRF systems from a KNX installation. The solution allows the integration of up to 4 indoor units from a single interface.
Mitsubishi Heavy Industries to Home Automation - Up to 4 Indoor Units
The Mitsubishi Heavy Industries application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Heavy Industries VRF systems from a Home Automation system. The solution allows the integration of up to 4 indoor units from a single interface.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.
A software based tool for testing PROFIBUS-DPV1 functionality effortlessly
The Anybus PROFIBUS-DPV1 Master Simulator enables you to set up and test slaves/adapters on PROFIBUS-DPV1 without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
Evaluate the CompactCom Module and its API before starting your integration
This adapter board gives an Anybus CompactCom Module the possibility to connect to the STM3240G-EVAL board. On this interface, the serial (UART), SPI, 8-bit parallel, and 16-bit parallel host communication interfaces are available. Please note, Anybus CompactCom Modules must be ordered separately.
Replaced by: IN485HIT001R000
This Hitachi-Modbus interface allowed full bidirectional communication between Hitachi VRF systems and Modbus RTU (RS-485) networks. The interface acted as a server device for the installation, accessing all signals from the air conditioner unit. Please refer to the new product reference for further details.
Replaced by: IN485UNI001I100
This Universal InfraRed (IR) device allows complete and natural integration of any air conditioner unit equipped with an infrared receiver into BACnet MS/TP or Modbus RTU networks. Please refer to the new product reference for further details.
Replaced by: IN771PAN00LO000
This Panasonic application was designed to allow bidirectional control and monitoring of Panasonic ECOi, PACi, ECOg / PAC, VRF systems from a BMS, SCADA, PLC, or any other device working as a BACnet/IP server or a BACnet MS/TP client. The solution allowed the integration of up to 128 indoor units from a single interface. Please refer to the new product reference for further details.
Replaced by: INWFIPAN001I100
The AC Cloud Control device for Panasonic allowed a complete and natural integration of Panasonic Etherea AC units into the AC Cloud Control system for professional HVAC control and monitoring through a native Android/iOS app or a web dashboard. Please refer to the new product reference for further details.
Toshiba to AC Cloud Control - 1 indoor unit
The AC Cloud Control device for Toshiba allows a complete and natural integration of Toshiba VRF and Digital systems into the AC Cloud Control system for professional HVAC control and monitoring via a native Android/iOS app or a web dashboard. It connects to the indoor unit remote controller port and is configured via Wi-Fi or Bluetooth.
Replaced by: IN770AIR00MO000
This Midea application was designed to allow bidirectional control and monitoring of Midea Commercial and VRF systems from a KNX installation. The solution allowed the integration of up to 64 indoor units from a single interface. Please refer to the new product reference for further details.
Haier to KNX - 64 indoor units
The Haier-KNX gateway allows bidirectional communication between Haier Commercial and VRF systems and KNX installations. This communication brings total control of the AC unit from KNX, including monitoring of the AC unit’s internal variables, running hours counter (for filter maintenance control), and error codes.
Midea to BACnet MS/TP - 1 indoor unit
The Midea-BACnet interface allows full bidirectional communication between Midea Commercial and VRF units and BACnet MS/TP networks. The interface enables BACnet communication via polling or subscription requests (COV), making the indoor unit available through independent BACnet objects.