Ixxat PC-interfaces enable flexible access to your CAN-based devices from a PC – for development, commissioning or maintenance.
Industrial VPN gateway for secure remote access to machines
The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!
Enabling connectivity and protection for CAN components
The Ixxat CAN-CR200 repeater with two CAN interfaces and one CAN backbone interface improves the CAN bus load capacity, establishes a physical coupling of bus systems and offers galvanic isolation. Multiple repeaters can be lined up and connected easily via the integrated DINrail bus to create various topologies and optimize network structures.
Enables real-time measurements of your installation
The Anybus SCOPE Repeater is a 1 Channel RS 485 PROFIBUS diagnostic repeater module with an integrated quality-oscilloscope for live measurements
Now with an intuitive interface for instant network insights
While retaining the same technical features as its predecessor, the Anybus Atlas2 Plus now boasts an intuitive interface. This enhancement enables users to gain immediate insights into their network’s health with a single comprehensive overview. For more information and how to order, please refer to the supporting materials of this product or contact us directly.
Enabling connectivity for computer systems to CAN networks via PCIe
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel and galvanic isolation, equipped with a standard profile slot bracket. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration, supporting various CAN applications.
Modbus TCP & RTU to BACnet/IP & MS/TP - 3000 points
Integrate any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa.
Easily get started with industrial remote access!
The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secure industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!
Industrial VPN gateway for secure remote access to machines
The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!
OCPP to Modbus TCP & RTU - Up to 20 chargers
Configure this gateway as a Modbus RTU/TCP - OCPP protocol translator or move a step further with its OCPP Central System mode, which allows the gateway and the BMS to substitute the Central System of the OCPP installation and get all the potential of the Modbus-based BMS.
Industrial VPN gateway for secure remote access to machines
The Ewon Cosy+ gateway establishes a secure VPN connection between the machine (PLC, HMI, or other devices) and the remote engineer. The connection happens through Talk2m, a highly secured industrial cloud service. The Ewon Cosy+ makes industrial remote access easy and secure like never before!
Enabling easy CANopen connectivity for SIMATIC systems
The Ixxat CM CANopen is a compact interface module designed for the integration of CANopen or CAN 2.0A devices with SIMATIC S7-1200 PLCs. Acting as a bridge with comprehensive support for CAN protocols, it facilitates communication and data transmission between devices and the PLC. For more flexible development and expansion of automation systems.
Mitsubishi Electric to Modbus TCP/RTU - Up to 100 groups
The Mitsubishi Electric application has been specially designed to allow bidirectional control and monitoring of Mitsubishi Electric City Multi systems from a BMS, SCADA, PLC, or any other device working as a Modbus client. The solution allows the integration of up to 100 groups from a single interface.
A software based tool for testing PROFIBUS functionality effortlessly
The Anybus PROFIBUS Master Simulator enables you to set up and test slaves/adapters on PROFIBUS without a PLC in place. It's ideal for testing wiring of inputs and outputs, as well as reading and writing analog values. Additionally, it's useful during the setup of slave/adapters in a network and during final inspection tests at the device manufacturer.
Network connectors - ready for use together with the CompactCom Brick
Used together with the CompactCom Brick to get quick and easy access to network connectors.