Wireless Bolt 5G The Wireless Bolt 5G enables you to create a robust cellular connection in an industrial production environment., Supporting high and low side switch up to 200 mA Digital output 1 x Power LED 1 x Status LED 2 x Ethernet LEDs 2 x SPE LEDs 2 x IO-Link LEDs LEDs System reset; Factory reset Reset button 1 x 4FF nano SIM 1 x MFF2 embedded SIM (on request) SIM Cellular Properties 5G/4G multi-mode, 3GPP Rel.165G NSA and SA mode, LTE DL Cat 16/UL Cat 18 Standard 5G NR: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 LTE ‐ TDD: B34, B38, B39, B40, B41, B42, B43, B48; LAA: B46 WCDMA: B1, B2, B4, B5, B8, B19 Frequency bands* 4 x internal cellular antennas Antennas Power Requirement 24 VDC (9 to 30 VDC) Input voltage Yes Reverse polarity protect Max 1 A @ 24 VDC Input current Ethernet and 5G -10 W; All communication interfaces 25 W Power consumption Power over Ethernet IEEE 802.3at Type 2, (Class 4, 42.5 -57 VDC, max 25.50 W) PoE standard SW Features Web based configuration interface Configuration Transparent router, Industrial Ethernet Layer2 tunnel, Linux software container mode Operation modes * Final band selection pending certification Mechanical M50 screw and nut (50.5 mm hole needed) Installation Plastic (PBT/PC) and recycled aluminum Enclosure material Diameter: 114 mm Height: 87 mm without power connector, 99mm incl. power connector Height above mounting surface: 44 mm Dimension Top (outside of host): IP66 and IP67 / UL Type 4X Base (inside of host): IP30 Ingress protection 300 g Weight Environmental -40 ° C to 70 ° C Operating temperature -40 ° C to 85 ° C Storage temperature EN 600068-2-78: Damp heat, +40°C, 90% (non-condensing) Humidity >200,000 hours MTBF Certifications CE/RED, UKCA, FCC, FCC/ISED, PTCRB, C UL US Pending Approvals Ordering Information NV1007 –Wireless Bolt 5G –Common (All communication interfaces and PoE/DC, power) NV1008 –Wireless Bolt 5G –Industrial Ethernet (Gigabit Ethernet and DC power only) NV1009 –Wireless Bolt 5G –Active Antenna (Gigabit Ethernet and PoE power only) NV1010 –Wireless Bolt 5G –Edge Computing (All communication interfaces and DC power only) Part number Cable Kit with DC Power pre-wired-part no., E-014 Bolt base protectorௗ -part no. 024708 Bolt base protector and 5G mounting bracket kit-part no. 024716 PoE injector 100-240 VAC. 35 W incl. world power cable-part no., Wireless Bolt 5G - Datasheet - 20230505