AWB4006-B, Anybus PoE injector 12-57VDCAWB4006-BThe Anybus Power over Ethernet Injector (PoE) makes it possible to supply an Anybus product, for example an Anybus WLAN Access point or Anybus Wireless Bolt RJ45, with power through an Ethernet cable.Supports PoEIndustrial gradeFlexible mounting Removes the need for an additional power cable.2-port Gigabit High Power injector with a rigid IP30 metal enclosure.

 Wireless Bolt 5G The Wireless Bolt 5G enables you to create a robust cellular connection in an industrial production environment., Supporting high and low side switch up to 200 mA Digital output 1 x Power LED 1 x Status LED 2 x Ethernet LEDs 2 x SPE LEDs 2 x IO-Link LEDs LEDs System reset; Factory reset Reset button 1 x 4FF nano SIM 1 x MFF2 embedded SIM (on request) SIM Cellular Properties 5G/4G multi-mode, 3GPP Rel.165G NSA and SA mode, LTE DL Cat 16/UL Cat 18 Standard 5G NR: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n29, n30, n38, n40, n41, n48, n66, n70, n71, n75, n76, n77, n78, n79 LTE-FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B29, B30, B32, B66, B71 LTE ‐ TDD: B34, B38, B39, B40, B41, B42, B43, B48; LAA: B46 WCDMA: B1, B2, B4, B5, B8, B19 Frequency bands* 4 x internal cellular antennas Antennas Power Requirement 24 VDC (9 to 30 VDC) Input voltage Yes Reverse polarity protect Max 1 A @ 24 VDC Input current Ethernet and 5G -10 W; All communication interfaces 25 W Power consumption Power over Ethernet IEEE 802.3at Type 2, power) NV1008 –Wireless Bolt 5G –Industrial Ethernet (Gigabit Ethernet and DC power only) NV1009 –Wireless Bolt 5G –Active Antenna (Gigabit Ethernet and PoE power only) NV1010 –Wireless Bolt 5G –Edge Computing (All communication interfaces and DC power only) Part number Cable Kit with DC Power pre-wired-part no., E-014 Bolt base protectorௗ -part no. 024708 Bolt base protector and 5G mounting bracket kit-part no. 024716 PoE injector 100-240 VAC. 35 W incl. world power cable-part no., AWB4006 Accessories Dimensions (mm), Wireless Bolt 5G - Datasheet - 20230505

 Power over Ethernet Injectors The Anybus Power over Ethernet Injector makes it possible to supply an Anybus product, for example an Anybus WLAN Access point or Anybus Wireless Bolt RJ45, with power through an Ethernet cable., TECHNICAL SPECIFICAT I O N S Description Anybus Power over Ethernet injector 100-240VAC Anybus Power over Ethernet injector 12-57VDC Order code AWB4005 AWB4006 PoE (Power over Ethernet) standard IEEE 802.3 af/at IEEE 802.3 af/at RJ45 Ethernet Port Input (Data, 10/100/1000 Base-T(x)) 1 2 RJ45 Ethernet Port with P., O u t p u t ( D ata and power, 10/100/1000 Base-T(x)) 1 2 Input Voltage 100-240 VAC (world connector kit with cable included) 12-57 VDC on 4-pin screw terminal block For UL compliance: 24-50 VDC +/-10% Output Voltage and Power 56V / 630mA @ 35 watts 50V / 600mA, 30 Watts max., LED PoE Indicators 1 x LED (power, error) 2 x LED Blue On: PoE Device Link Blue Blinking: Detecting PoE Device Blue Off : None PoE Device Detected Short Circuit Protection Yes Yes Overload Protection Yes Yes High voltage protection Yes Yes Mounting Wall mount with screws DIN rail + wall mount (included) Weight 210 g 370g Protection class IP21 IP30 Storage temperature -40 to 85 °C (-40 to 185 °F) -40 to 80°C (-40 to 176°F) Operating temperature -25 to 60 °C (-13 to 140 °F) -20 to 70°C (-4 to 158°F) Housing Plastic (PC) Metal Dimensions W×H×D 75 x 125 x 38 41 x 95 x 70 CERTIFICATIONS EMI FCC Part 15, EN55022 class B FCC Part 15, CISPR (EN55022) class A EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 Safety UL 1950 / CSA 22.2 / TUV EN60950 EN60950-1 Shock -

S e c u red Management by HTTPS is also supported., • Supports AP/Bridge/Repeater/AP-Client Mode, Connect Bridges and Bolts Anybus WLAN Access Points are designed to work seamlessly with Anybus Wireless Bridge or Bolt which gives industrial equipment wireless access., Availability AWB4001 WLAN a/b/g/n Access Point IP30 AWB4003 WLAN a/b/g/n M12 PoE (EU version) Access Point IP67 AWB4004 WLAN a/b/g/n M12 PoE (US version) Access Point IP67 AWB4005 Anybus Power over Ethernet injector 100-240VAC AWB4006 Anybus Power over Ethernet injector 12-57VDC Accessories 024705 Power Cable 3m 5-pin M12 Male A-code open leads. 024706 Ethernet Cable 3m 8-pin M12 Male A-code RJ45. 1.04.0085.00000 Magnetic antenna foot with 1,5 m cable and RPSMA connector, excl., Other marks and words belong to their respective companies.

If this equipment is used in a manner not specified by the manufacturer, the protection provided by the equipment may be impaired., Ethernet/PoE connector pinning (RJ45) 10/100 Mbit Ports Pin Data IN (data only) PoE OUT (data + power) 1 Data Receive Data Receive and Power (+) 2 Data Receive Data Receive and Power (+) 3 Data Transmit Data Transmit and Power (-) 4 (not connected) (not connected) 5 (not connected) (not connected) 6 Data Transmit Data Transmit and Power (-) 7 (not connected) (not connected) 8 (not connected) (not connected) Ethernet/PoE Connectors Anybus ® PoE Injector 12–57 VDC SP2385 Version 1.4 Page 7 of 16 Gigabit Ports Pin Data IN (data only) PoE OUT (data + power) 1 Data BI_DA+ Data BI_DA+ and Power(+) 2 Data BI_DA- Data BI_DA- and Power(+) 3 Data BI_DB+ Data BI_DB+ and Power(-) 4 Data BI_DC+ Data BI_DC+ 5 Data BI_DC- Data BI_DC- 6 Data BI_DB- Data BI_DB- and Power(-) 7 Data BI_DD+ Data BI_DD+ 8 Data BI_DD- Data BI_DD- IMPORTANT Do not connect pins 3 or 6 to ground., LED Indicators PWR Green Power on PoE 1 Off No PoE device on port 1 Blue, blinking Detecting PoE device on port 1 Blue, steady PoE device link on port 1 PoE 2 Off No PoE device on port 2 Blue, blinking Detecting PoE device on port 2 Blue, steady PoE device link on port 2 Anybus ® PoE Injector 12–57 VDC LED Indicators Page 10 of 16 SP2385 Version 1.4 4., Te c h n i cal Specifications Order code AWB4006-B PoE standard IEEE 802.3at/802.3af Ethernet IN 2x RJ45 (Data, 10/100/1000 Base-T(x)) Ethernet OUT 2 x RJ45 (Data and power, 10/100/1000 Base-T(x)) Input voltage 12-57 VDC on 4-pin screw terminal block For UL compliance: 24–50 VDC +/-10% Output voltage 50 V / 600 mA, 30 W max. per port Power Dissipation (PD) Maximum 8 W when both ports deliver 30 W of electrical power each., This page is intentionally left blank.

Anybus Wireless Bolt Ethernet RJ45 PoE AWB2030 or AWB2031 To set up a Wi-Fi Access Point Anybus PoE Injector 12-57 VDC AWB4006 Supply the units with power over Ethernet. 4 x CAT6 Ethernet cables N/A 2 x 0.2 m and 2 x 0.5 m or any suitable length., To s u p p l y B o l t LTE and Bolt Ethernet RJ45 with power, we have connected a Ethernet Power Injector between the Bolt's and the Flexy 205., Connect the Devices A.Ewon Flexy 205 B.Anybus PoE Injector 12-57VDC C.Anybus Bolt LTE D.Anybus Bolt RJ45 PoE Figure 3., a.Enter the Bolt LTE IP address in your web browser and click Enter., b .Loginto the Bolt LTE built-in web interface., Application Note - Connect Flexy 205 to Internet via Bolt LTE/Bolt Ethernet RJ45 PoE