CAN Ethernet gateway, bridge and PC interface
Item number 1.01.0332.10000
The Ixxat CAN@net NT 100 is a multifunctional gateway, bridging CAN networks via Ethernet for remote access and enhanced reliability. It features one CAN channel and supports long-distance communication, with several message processing and cloud connection functionalities. For more efficient network management.
The Ixxat CAN@net NT can be used as PC interface, as CAN-Ethernet-CAN bridge or as CAN Ethernet gateway – all in one device.
The Ixxat VCI driver package enables easy integration into PC-based Ixxat applications and customer-specific programs. Ideal for configuration, analysis and maintenance.
The bridge mode enables easy message exchange between CAN systems, also over Ethernet – to setup tree or star topologies or to enable long-range communication.
In gateway mode, the device can be accessed regardless of the operating system or platform, using a simple ASCII protocol via TCP/IP socket.
Optimized topologies enable simpler wiring, resulting in less cables and cost savings at installation and maintenance.
Advanced filter, ID translation, data mapping and multiplexing functionalities streamline network traffic and enhance efficiency.
Additional programming of action rules using LUA for tailored responses to specific network events.
Network segmentation with galvanic isolation protects devices against damage caused by voltage peaks.
MQTT support allows direct transmission of information to the cloud, facilitating IoT and remote monitoring applications.
Defined assess levels for configuration or firmware upload.
Windows configuration tool allows for easy setup and maintenance via USB or Ethernet.
KNX to Modbus TCP & RTU - 1200 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects Interbus FO and PROFINET-IO control systems
The Anybus X-gateway Interbus FO Slave to PROFINET-IO Device enables you to connect any Interbus FO system to any PROFINET-IO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects EtherCAT and Interbus CU control systems
The Anybus X-gateway EtherCAT Slave to Interbus CU Slave enables you to connect any EtherCAT system to any Interbus CU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects ControlNet and Modbus RTU control systems
The Anybus X-gateway ControlNet Adapter to Modbus RTU Slave enables you to connect any ControlNet control system to any Modbus RTU control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
BACnet/IP & MS/TP to Modbus TCP & RTU - 3000 points
Integrate any BACnet MS/TP or BACnet/IP server device with a Modbus BMS or any Modbus TCP or RTU controller. This integration aims to make BACnet objects, data, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
Enable seamless integration of serial devices to Studio 5000
The Anybus EtherNet/IP to Modbus TCP Linking Device converts Modbus TCP to EtherNet/IP, enabling you to connect any Modbus TCP device to a Logix PLC control system. The linking device presents Modbus TCP data as easily processed I/O data, offloading the PLC from working with extra calculations and allowing for seamless integration with Studio 5000.
Enable communication between industrial devices and Industrial Ethernet networks
The Anybus CompactCom 40 Common Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET, EtherCAT, EtherNet/IP, Modbus TCP, Powerlink, or BACnet/IP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
A protocol converter that connects Modbus TCP and Modbus TCP control systems
The Anybus X-gateway Modbus TCP Server to Modbus TCP Server enables you to connect any Modbus TCP control system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects DeviceNet devices to Modbus RTU PLCs
The Anybus X-gateway DeviceNet Master to Modbus-RTU Slave enables you to connect any DeviceNet device or equipment to Modbus-RTU control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects Interbus CU and Modbus TCP control systems
The Anybus X-gateway Interbus CU Slave to Modbus TCP Server enables you to connect any Interbus CU system to any Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
A protocol converter that connects CANopen devices to DeviceNet PLCs
The Anybus X-gateway CANopen Master to DeviceNet Adapter enables you to connect any CANopen Master device or equipment to DeviceNet control systems. It can be used when there is no existing CANopen control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable communication between industrial devices and PROFINET IRT networks
The Anybus CompactCom 40 PROFINET IRT - Transparent Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The Transparent Ethernet channel lets you utilize high-end processors for custom IT functions. The brick is ideal for specific connector/IP class needs.
Enable communication between industrial devices and BACnet MS/TP networks
The Anybus CompactCom 30 BACnet MS/TP without housing is a communication interface that can be embedded into any industrial device or machine to enable communication with BACnet MS/TP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
PC interface card for CAN (1 x CAN), galv. isolated
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel and galvanic isolation, equipped with a standard profile slot bracket. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration, supporting various CAN applications.
The CAN-GW100/RS232 is a CAN to RS232 gateway enabling connection of devices with RS232 interface to CAN systems. The device offers an CANopen operation mode for easy integration into CANopen based environments.
PC interface card for CAN (2 x CAN), galv. isolated
The Ixxat CAN-IB410/PMC is an active PMC interface card with two CAN channels and galvanic isolation. It is an easy and cost-efficient way to connect computers to a CAN bus network. Based on a modular design, the card enables simple integration into diverse industrial setups, supporting various CAN applications.
A protocol converter that connects Modbus RTU and POWERLINK control systems
The Anybus X-gateway Modbus RTU Slave to POWERLINK Device enables you to connect any Modbus RTU system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
PC interface adapter (1 x CAN), galv. isolated
The Ixxat USB-to-CAN V2 embedded with galvanic isolation is an easy and cost-efficient way to connect a computer with an internal USB connection to a CAN bus network. It enables simple integration into diverse industrial setups, supporting various CAN applications, from testing and development to maintenance and control tasks.
A protocol converter that connects POWERLINK and POWERLINK control systems
The Anybus X-gateway POWERLINK Device to POWERLINK Device enables you to connect any POWERLINK system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable communication between industrial devices and EtherNet/IP networks
The Anybus CompactCom 30 EtherNet/IP is a communication interface that can be embedded into any industrial device or machine to enable communication with EtherNet/IP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
A protocol converter that connects AS-Interface devices to PROFINET-IRT PLCs
The Anybus X-gateway AS-Interface Master to PROFINET IRT Device enables you to connect any AS-Interface device or equipment to PROFINET IRT control systems. It can be used when there is no existing AS-Interface control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Piggyback module for CAN interface cards
The MultiCAN expansion board for the Ixxat CAN-IB series enhances the card's capabilities by providing two additional high-speed CAN channels. Acting as a piggy-back module, it doubles the number of available high-speed CAN channels on a D-Sub 9 connector and reduces slot requirements, making it ideal for expanding CAN networks efficiently.
Evaluate the CompactCom Brick and its API before starting your integration
The Anybus CompactCom Starter Kit enables evaluation and demonstration of different applications and use cases in a Windows environment. It offers instant access to CompactCom when combined with Anybus’ Host Application Example Code. Please note, Anybus CompactCom Bricks and connector boards must be ordered separately.
A protocol converter that connects CANopen and PROFINET-IRT FO control systems
The Anybus X-gateway CANopen Slave to PROFINET-IRT FO Device enables you to connect any CANopen system to any PROFINET-IRT FO control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Connects computers and embedded systems to PROFINET IRT networks
The Ixxat INpact PIR Slave PCIe Mini Kit is a versatile and efficient solution to connect embedded systems and PCs to Profinet IRT networks. This preconfigured PROFINET IRT variant features a compact PCIe Mini format and delivers precise, isochronous real-time data exchange, ideal for motion control and synchronized tasks. The kit includes an Ixxat INpact PCIe Mini, a a connection cable and a bus coupling unit.
BACnet/IP & MS/TP to KNX - 600 points
Integrate any BACnet MS/TP or BACnet/IP server device with any KNX device or system. This integration aims to make BACnet objects data and resources accessible from a KNX system as if they were a part of the KNX system and vice versa.
KNX to Modbus TCP & RTU - 250 points
Integrate any KNX device or installation with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make KNX communication objects and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects DeviceNet devices to PROFIBUS PLCs
The Anybus X-gateway DeviceNet Master to PROFIBUS Slave enables you to connect any DeviceNet device or equipment to PROFIBUS control systems. It can be used when there is no existing DeviceNet control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
The Ixxat SG-gateway is used to integrate various industrial and energy-related devices into SCADA or cloud systems. It enables secure and reliable communication between energy systems, control rooms and industrial automation systems.
Configurable automotive platform (6 x CAN + 2 x CAN FD)
The Ixxat FRC-EP170 Plus CANonly is a compact solution for automotive uses, focusing on CAN-based operations. Featuring LIN and six CAN channels, thereof two CAN FD and one CAN low-speed capable, it's ideal for logging, gateway, and residual bus simulation applications – easily configurable with the Ixxat Advanced Configuration Tool (ACT).
Replaced by: IN701KNX1000000
Designed for the integration of any KNX device or installation with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aimed to make KNX communication objects and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
Enable communication between industrial devices and PROFINET networks
The Anybus CompactCom 40 PROFINET-IRT - Transparent Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The Transparent Ethernet channel lets you utilize high-end processors for custom IT functions. The module includes connectors for a fast time to market.
A protocol converter that connects EtherCAT and Lonworks control systems
The Anybus X-gateway EtherCAT Slave to Lonworks Slave enables you to connect any EtherCAT system to any Lonworks control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
DALI-2 to Modbus TCP - 1 DALI channel
Integrate any DALI/DALI-2 driver and DALI-2 light sensor or occupancy sensor with a Modbus BMS or any Modbus TCP controller. This integration aims to make DALI devices and their data and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and viceversa.
PC interface card for CAN (1 x CAN)
The Ixxat CAN-IB100/PCIe is a passive PCI Express interface card with one CAN channel. It is an easy and very cost-efficient way to connect computers to a CAN bus network, enabling simple integration into diverse industrial setups, supporting various CAN applications.
Enable communication between industrial devices and BACnet MS/TP networks
The Anybus CompactCom 30 BACnet MS/TP is a communication interface that can be embedded into any industrial device or machine to enable communication with BACnet MS/TP networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
A protocol converter that connects serial devices to PROFINET-IRT control systems.
The Anybus Communicator – Serial Master to PROFINET-IRT converts serial protocols to PROFINET-IRT, enabling you to connect any RS-232/485 device or equipment to PROFINET-IRT control systems. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Enable communication between industrial devices and PROFINET-IRT networks
The Anybus CompactCom 40 Without Housing - PROFINET-IRT is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET-IRT networks. The module version includes connectors to simplify installation, helping you achieve a fast time to market.
Enable communication between industrial devices and PROFIBUS networks
The Anybus CompactCom 40 PROFIBUS is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFIBUS networks. The brick version is fully embedded into the industrial device and is the best choice if you have limited space or need a specific connector or protection class.
Replaced by: IN7004851K20000
Designed for the integration of any Modbus RTU or TCP server device, or both simultaneously, with a BACnet BMS or any BACnet/IP or BACnet MS/TP controller. This integration aims to make Modbus signals and resources accessible from a BACnet-based control system or device as if they were a part of the BACnet system and vice versa. Please refer to the new product reference for further details.
A protocol converter that connects Ethernet and PROFIBUS DP control systems
The Anybus Communicator Ethernet to PROFIBUS DP device ATEX enables you to connect any Ethernet control system to any PROFIBUS DP control system. Anybus Communicators ensure reliable, secure, high-speed data transfers between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
Connects computers and embedded systems to industrial Ethernet networks
The Ixxat INpact CE Slave PCIe is a versatile and efficient solution to embedded systems or PCs to various industrial networks. This Common Ethernet variant offers preinstalled or downloadable Industrial Ethernet protocols, enabling flexible multi-network communication in a robust PCIe format.
Enable communication between industrial devices and PROFINET networks
The Anybus CompactCom 40 PROFINET-IRT - Transparent Ethernet is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The Transparent Ethernet channel lets you utilize high-end processors for custom IT functions. The module includes connectors for a fast time to market.
BACnet/IP & MS/TP to Modbus TCP & RTU - 250 points
Integrate any BACnet MS/TP or BACnet/IP server device with a Modbus BMS or any Modbus TCP or RTU controller. This integration aims to make BACnet objects, data, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects Modbus TCP devices to Modbus TCP PLCs
The Anybus X-gateway Modbus TCP Client to Modbus TCP Server enables you to connect any Modbus TCP device or equipment to Modbus TCP control systems. It can be used when there is no existing Modbus TCP control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
M-BUS to Modbus TCP & RTU - 60 devices
Integrate any M-Bus device with a Modbus BMS or any Modbus TCP or Modbus RTU controller. This integration aims to make M-Bus devices, their registers, and resources accessible from a Modbus-based control system or device as if they were a part of the Modbus system and vice versa.
A protocol converter that connects Modbus TCP devices to EtherCAT control systems
The Anybus Communicator Modbus TCP Client to EtherCAT enables you to connect Modbus TCP devices to EtherCAT control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfer between different industrial networks. Thanks to our intuitive web-based user interface, they're also incredibly easy to use.
A protocol converter that connects devices to Industrial Ethernet control systems
The Anybus Communicator Common Ethernet to Common Ethernet enables you to connect any device or equipment to PROFINET, EtherCAT, EtherNet/IP, and Modbus TCP control systems. Anybus Communicators ensure reliable, secure, and high-speed data transfers. The intuitive user interface makes them incredibly easy to use.
Enable communication between industrial devices and PROFINET IO 2-Port networks
The Anybus CompactCom 30 PROFINET 2-port is a communication interface that can be embedded into any industrial device or machine to enable communication with PROFINET networks. The brick version is fully embedded into the industrial device and is the best choice if you have limited space or need a specific connector or protection class.
A protocol converter that connects CC-Link IE Field and POWERLINK control systems
The Anybus X-gateway CC-Link IE Field Slave to POWERLINK Device enables you to connect any CC-Link IE Field control system to any POWERLINK control system. Anybus gateways ensure reliable, secure, high-speed data transfers between different industrial networks while being easy to use.
Training from HMS Academy reduces the total cost and time of your project and gives improved quality and efficiency of the solution.
HMS offers trainings related to products, technologies and more. This could be in the form of an onsite training, online training or by running one of our E-learning sessions.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
Technical Services from HMS helps customers with any type of assistance needed in addition to the products bought from HMS. The Technical Services page offers a list of all services we provide.
The services are provided by HMS’ global team of skilled and experienced engineers who work together with you, providing various services.
Typical activities are project planning, setting up evaluation demos, creating and validating product configurations, providing guidance during field trials, and more.
